ASEM10-16 / ASEM10-25 / ASEM10-30 / ASEM10-35 / ASEM10-45 / ASEM15-16 / ASEM15-25 / ASEM15-30 Reach Stacker. This class handles put-away and retrieval on pallet racking.

Specification
Values are copied from the source record in their original order and units.
| Parameter | Value |
|---|---|
| Model | ASEM10-16 / ASEM10-25 / ASEM10-30 / ASEM10-35 / ASEM10-45 / ASEM15-16 / ASEM15-25 / ASEM15-30 |
| Rated Capacity | 1000 / 1500 kg |
| Load Center | 500 mm |
| Max.Fork Height | 1600 / 2500 / 3000 / 3500 / 4500 mm |
| Max.Machine Height | 2400 / 3300 / 3800 / 4300 / 5300 mm |
| Handle Height | 1450 mm |
| 600 mm | |
| Fork Size | 1070×100 / 1070×120 mm |
| Fork Width | 220-680 / 260-680 mm |
| Min.Turning Radius | 2000 mm |
| Wheel Base | 1470 mm |
| Max.Speed Without Load | 4.5~6 |
| Max.Speed With Load | 4~5 |
| Max.Climbing Capacity | 8~10 % |
| Driving Motor | 24/1.5 |
| Lifting Motor | 24/2.2 |
| Bttery | 210 / 240 |
| Charger | 24/30 |
| Overall Length | 2410 mm |
| Overall Width | 1070 mm |
| Overall Height | 2140 / 1830 / 2080 / 2330 mm |
ASEM10-16 / ASEM10-25 / ASEM10-30 / ASEM10-35 / ASEM10-45 / ASEM15-16 / ASEM15-25 / ASEM15-30 Reach Stacker, part of the Reach stackers line.
Reach stackers and straddle trucks that store loads deep in narrow-aisle racking.
Order picking at height
Published figures for this build: rated capacity 1000 / 1500 kg, overall width 1070 mm, turning radius 2000 mm.
Stackers work in narrow aisles where a counterbalance truck will not turn.
The walk-behind model leaves the operator free to guide each load.
Walk-behind and stand-on stackers put loads straight onto racking.
Walk-behind and stand-on stackers put loads straight onto racking.
Confirm the charger voltage or fuel type for your destination country. Compare rated capacity against the heaviest single load you move.
The specification sheet records Model: ASEM10-16 / ASEM10-25 / ASEM10-30 / ASEM10-35 / ASEM10-45 / ASEM15-16 / ASEM15-25 / ASEM15-30; Rated Capacity (Q): 1000 / 1500 kg; Load Center (C): 500 mm; Max.Fork Height (H3): 1600 / 2500 / 3000 / 3500 / 4500 mm; Max.Machine Height (H4): 2400 / 3300 / 3800 / 4300 / 5300 mm; Handle Height (H2): 1450 mm.
The specification sheet records Fork Size (1×n): 1070×100 / 1070×120 mm; Fork Width (E): 220-680 / 260-680 mm; Min.Turning Radius (Wa): 2000 mm; Wheel Base (Y): 1470 mm; Max.Speed Without Load (km/h): 4.5~6; Max.Speed With Load (km/h): 4~5.
The specification sheet records Max.Climbing Capacity (%): 8~10 %; Driving Motor (v/kw): 24/1.5; Lifting Motor (v/kw): 24/2.2; Bttery (v/ah): 210 / 240; Charger (v/a): 24/30; Overall Length (mm): 2410 mm.
The specification sheet records Overall Width (mm): 1070 mm; Overall Height (mm): 2140 / 1830 / 2080 / 2330 mm.
Units are copied as published; convert them only when comparing models.
Rated figures apply at the standard load centre unless a row says otherwise.
Each row in the table keeps the label and value from the source record.
An em dash marks a value the source record did not publish.
Configuration follows the load, working height and site layout.
Send pallet size, door height and aisle width with the enquiry.
Dimensions in the table come from the source record.
Check the machine weight against floor loading where the site is raised.
Match the power arrangement to the shifts and the working environment.
List the models that clear each constraint before asking for a quote.
Check the chassis width against the aisle and the container door.
On the ASEM10-16 / ASEM10-25 / ASEM10-30 / ASEM10-35 / ASEM10-45 / ASEM15-16 / ASEM15-25 / ASEM15-30, note any slope, threshold or step along the working route.
State the shifts per day so the power arrangement can be sized properly.
On the ASEM10-16 / ASEM10-25 / ASEM10-30 / ASEM10-35 / ASEM10-45 / ASEM15-16 / ASEM15-25 / ASEM15-30, mark the stations where loads are picked up and dropped off each shift.
Describe the floor surface: sealed concrete, asphalt, gravel or packed earth.
On the ASEM10-16 / ASEM10-25 / ASEM10-30 / ASEM10-35 / ASEM10-45 / ASEM15-16 / ASEM15-25 / ASEM15-30, check the lowest door, beam height and aisle the truck has to pass through.
On the ASEM10-16 / ASEM10-25 / ASEM10-30 / ASEM10-35 / ASEM10-45 / ASEM15-16 / ASEM15-25 / ASEM15-30, loads are kept low while travelling between stations.
Attachments are secured before the machine leaves the station.
On the ASEM10-16 / ASEM10-25 / ASEM10-30 / ASEM10-35 / ASEM10-45 / ASEM15-16 / ASEM15-25 / ASEM15-30, routine checks cover tyres, brakes, controls and visible leaks.
The operator checks load stability before each lift or move.
On the ASEM10-16 / ASEM10-25 / ASEM10-30 / ASEM10-35 / ASEM10-45 / ASEM15-16 / ASEM15-25 / ASEM15-30, the layout drawing shows where each machine sits in the operation.
Spare parts for wear items follow the parts manual after delivery.
On the ASEM10-16 / ASEM10-25 / ASEM10-30 / ASEM10-35 / ASEM10-45 / ASEM15-16 / ASEM15-25 / ASEM15-30, the receiving side pairs it with a dock ramp or platform where needed.
This machine usually works alongside pallet trucks and stacking equipment.
On the ASEM10-16 / ASEM10-25 / ASEM10-30 / ASEM10-35 / ASEM10-45 / ASEM15-16 / ASEM15-25 / ASEM15-30, any option not listed should be confirmed in writing before order.
The signed datasheet issued with the quotation is the binding version.
On the ASEM10-16 / ASEM10-25 / ASEM10-30 / ASEM10-35 / ASEM10-45 / ASEM15-16 / ASEM15-25 / ASEM15-30, dimensions are checked against the source record before quoting.
Attachments are quoted separately once the base chassis is fixed.
On the ASEM10-16 / ASEM10-25 / ASEM10-30 / ASEM10-35 / ASEM10-45 / ASEM15-16 / ASEM15-25 / ASEM15-30, documents issued for an order are listed in the quotation.
Quote the serial number and component name when ordering spares.
On the ASEM10-16 / ASEM10-25 / ASEM10-30 / ASEM10-35 / ASEM10-45 / ASEM15-16 / ASEM15-25 / ASEM15-30, the enquiry should include the quantity and destination port.
Wear parts are supplied after delivery against the parts manual.
Ask for the specific certificate required for your target country.
Test and conformity documents follow the model and destination market.
The operation material covers controls, checks and routine service points.
Published overall dimensions for this build are about 2.41 m long and 1.07 m wide.
On a standard 20GP dry-van floor that footprint allows about 4 unit(s) per layer; a 40HQ allows about 8 unit(s) per layer.
The count is a footprint estimate against standard dry-van internal dimensions, not a loading guarantee. Final blocking, bracing and stacking follow the loading plan confirmed before sealing, and this model can be combined with other families in one container where the floor allows.
Questions
The specification lists a load centre of 500 mm. Loads carried farther forward reduce rated capacity.
The listed turning radius is 2000 mm. Aisle width also depends on pallet depth and fork length.
Container entry depends on lowered width, mast height and guard clearance. Compare these with the container door.
The product range is CE marked and the factory holds ISO 9001, ISO 14001 and ISO 18001. The documents issued for a specific order are listed in the quotation.
Many forklift, pallet truck, stacker and reach truck models are held in ready stock; customised units are built in about 25 days. The confirmed date for your order is stated on the proforma invoice.
The machine ships with a parts manual. Wear parts can be ordered after delivery against serial number and part name.
Send load per move, lift height, floor surface, quantity and destination port. The reply lists the matching specification.
Prices are not published. Price follows chassis, mast or lift option, power arrangement, tyres and destination port; send the specification and you receive a line-by-line offer.
The minimum order quantity is one set, and mixed models can be combined in one container.
Related
Same-family comparison using the published source figures; open a model page for the full specification.
Explore
Send the load per move, the lift height and the floor surface. The sales desk matches the chassis to those figures and replies with a line-by-line offer.