Hydraulic type of mobile dock ramp Hydraulic type of mobile dock ramp, rated capacity 1500, lift height 1600. Ground conditions at the ramp end decide the leg placement.

Specification
Values are copied from the source record in their original order and units.
| Parameter | Value |
|---|---|
| Model | YDQ15/16 |
| Rated lifting capacity | 1500 |
| Max. lifting height | 1600 |
| Dimensions of table | 2000*1600 |
| Voltage | DC24V/AC380V |
Gallery
All detail images published for this model.






Hydraulic type of mobile dock ramp Hydraulic type of mobile dock ramp, part of the Dock ramps line.
Mobile yard ramps and container ramps that bridge ground and trailer bed without a fixed dock.
Seasonal loading point access
Published figures for this build: rated capacity 1500 kg, lift height 1600.
A dock ramp bridges the gap between a truck bed and the warehouse floor.
The deck and legs carry the truck and load between ground and trailer.
Ramp grade and width are matched to the wheel and load combination.
Mobile ramps suit rented space or seasonal loading points.
Note cold store, outdoor gradient or container entry as a constraint. Check closed mast or chassis height against the lowest door on the route.
The specification sheet records Model: YDQ15/16; Rated lifting capacity (kg): 1500; Max. lifting height (mm): 1600; Dimensions of table (mm): 2000*1600; Voltage (v): DC24V/AC380V.
Remaining parameters are listed row by row in the specification table.
Options and attachments are listed separately from the base chassis.
Each row in the table keeps the label and value from the source record.
An em dash marks a value the source record did not publish.
Units are copied as published; convert them only when comparing models.
Configuration follows the load, working height and site layout.
The listed figures follow the record; options are confirmed on the quotation.
Measure the pallet footprint before the chassis is shortlisted.
Check the chassis width against the aisle and the container door.
List the models that clear each constraint before asking for a quote.
Review the tyre type against the surface the machine will run on.
Match the power arrangement to the shifts and the working environment.
On the Hydraulic type of mobile dock ramp, describe the floor surface: sealed concrete, asphalt, gravel or packed earth.
List the attachments required, such as clamps, sideshift or rotator.
On the Hydraulic type of mobile dock ramp, send photographs of the racking and the existing working area when possible.
Check the lowest door, beam height and aisle the truck has to pass through.
On the Hydraulic type of mobile dock ramp, keep the charging or refuelling position clear of the main traffic aisle.
On the Hydraulic type of mobile dock ramp, attachments are secured before the machine leaves the station.
Routine checks cover tyres, brakes, controls and visible leaks.
On the Hydraulic type of mobile dock ramp, the working area is kept clear of loose packaging and obstacles.
Battery or fuel levels are checked at the start of each shift.
On the Hydraulic type of mobile dock ramp, attachments such as clamps or rotators are matched to the load shape.
The receiving side pairs it with a dock ramp or platform where needed.
On the Hydraulic type of mobile dock ramp, spare parts for wear items follow the parts manual after delivery.
Related models in the same group are listed on the family page.
On the Hydraulic type of mobile dock ramp, site conditions such as gradient, dust and moisture belong in the enquiry.
Any option not listed should be confirmed in writing before order.
On the Hydraulic type of mobile dock ramp, capacity above the rated lift height follows the mast curve.
The signed datasheet issued with the quotation is the binding version.
On the Hydraulic type of mobile dock ramp, the enquiry should include the quantity and destination port.
Quote the serial number and component name when ordering spares.
On the Hydraulic type of mobile dock ramp, wear parts are supplied after delivery against the parts manual.
Packing follows sea-freight practice for the chosen chassis.
The serial number identifies the build when parts are ordered later.
Ask for the specific certificate required for your target country.
The parts manual lists the wear items and their reference views.
Questions
The listed rated capacity is 1500 at the standard load centre. Above the rated lift height capacity derates along the mast curve.
The specification sheet lists 1600 for this build. Send the rack beam and door heights together to size the mast.
Container entry depends on lowered width, mast height and guard clearance. Compare these with the container door.
The product range is CE marked and the factory holds ISO 9001, ISO 14001 and ISO 18001. The documents issued for a specific order are listed in the quotation.
Many forklift, pallet truck, stacker and reach truck models are held in ready stock; customised units are built in about 25 days. The confirmed date for your order is stated on the proforma invoice.
The machine ships with a parts manual. Wear parts can be ordered after delivery against serial number and part name.
Send load per move, lift height, floor surface, quantity and destination port. The reply lists the matching specification.
Prices are not published. Price follows chassis, mast or lift option, power arrangement, tyres and destination port; send the specification and you receive a line-by-line offer.
The minimum order quantity is one set, and mixed models can be combined in one container.
Related
Same-family comparison using the published source figures; open a model page for the full specification.
Explore
Send the load per move, the lift height and the floor surface. The sales desk matches the chassis to those figures and replies with a line-by-line offer.