Fixed dock leveler (DCQ8-0.7 / DCQ10-0.7 / DCQ12-0.7), 750 W. The deck and legs carry the truck and load between ground and trailer.

Specification
Values are copied from the source record in their original order and units.
| Parameter | Value |
|---|---|
| Model | DCQ8-0.7 / DCQ10-0.7 / DCQ12-0.7 |
| Capacity | ton / 8 / 10 / 12 |
| Platform size | 2440x1830 mm |
| Lip length | 400 mm |
| Loading range | +400~ -300 mm |
| Motor | 750 W |
| Assamble size | / 2600x1860x510 |
Gallery
All detail images published for this model.


DCQ8-0.7 / DCQ10-0.7 / DCQ12-0.7 Fix dock leveler, part of the Dock ramps line.
Mobile yard ramps and container ramps that bridge ground and trailer bed without a fixed dock.
Ramp-assisted truck loading
Published figures for this build: rated capacity ton / 8 / 10 / 12.
Ground conditions at the ramp end decide the leg placement.
A dock ramp bridges the gap between a truck bed and the warehouse floor.
Ground conditions at the ramp end decide the leg placement.
The deck and legs carry the truck and load between ground and trailer.
Note cold store, outdoor gradient or container entry as a constraint. Describe the shifts per day when the power arrangement is selected.
The specification sheet records Model: DCQ8-0.7 / DCQ10-0.7 / DCQ12-0.7; Capacity: ton / 8 / 10 / 12; Platform size (mm): 2440x1830 mm; Lip length (mm): 400 mm; Loading range (mm): +400~ -300 mm; Motor (w): 750 W.
The specification sheet records Assamble size (mm): / 2600x1860x510.
Options and attachments are listed separately from the base chassis.
Those missing values can be requested directly through the enquiry form.
Rated figures apply at the standard load centre unless a row says otherwise.
Each row in the table keeps the label and value from the source record.
Configuration follows the load, working height and site layout.
Door and beam heights decide which mast will clear the route.
The listed figures follow the record; options are confirmed on the quotation.
Note any attachment that changes the load centre or the overall width.
List the models that clear each constraint before asking for a quote.
Compare capacity first, then the lift height the job actually needs.
Check the chassis width against the aisle and the container door.
On the DCQ8-0.7 / DCQ10-0.7 / DCQ12-0.7, note any slope, threshold or step along the working route.
Measure the pallet footprint and the heaviest single load before comparing models.
On the DCQ8-0.7 / DCQ10-0.7 / DCQ12-0.7, check headroom under beams, pipes and door frames along the route.
Describe the floor surface: sealed concrete, asphalt, gravel or packed earth.
On the DCQ8-0.7 / DCQ10-0.7 / DCQ12-0.7, mark the stations where loads are picked up and dropped off each shift.
On the DCQ8-0.7 / DCQ10-0.7 / DCQ12-0.7, the working area is kept clear of loose packaging and obstacles.
Battery or fuel levels are checked at the start of each shift.
On the DCQ8-0.7 / DCQ10-0.7 / DCQ12-0.7, routine checks cover tyres, brakes, controls and visible leaks.
Unusual noise or movement is reported before further use.
On the DCQ8-0.7 / DCQ10-0.7 / DCQ12-0.7, a mixed enquiry can list this model together with other families.
Spare parts for wear items follow the parts manual after delivery.
On the DCQ8-0.7 / DCQ10-0.7 / DCQ12-0.7, the layout drawing shows where each machine sits in the operation.
This machine usually works alongside pallet trucks and stacking equipment.
On the DCQ8-0.7 / DCQ10-0.7 / DCQ12-0.7, attachments are quoted separately once the base chassis is fixed.
The signed datasheet issued with the quotation is the binding version.
On the DCQ8-0.7 / DCQ10-0.7 / DCQ12-0.7, tyre choice should match the floor rather than the price list.
Any option not listed should be confirmed in writing before order.
On the DCQ8-0.7 / DCQ10-0.7 / DCQ12-0.7, the operation and parts material travel with the machine.
Documents issued for an order are listed in the quotation.
On the DCQ8-0.7 / DCQ10-0.7 / DCQ12-0.7, quotations follow the model, listed specification and destination port.
Mixed equipment can be listed on one enquiry.
The operation material covers controls, checks and routine service points.
Ask for the specific certificate required for your target country.
Test and conformity documents follow the model and destination market.
Questions
The listed power arrangement is 750 W. Confirm the supply voltage or fuel type for your site before ordering.
Container entry depends on lowered width, mast height and guard clearance. Compare these with the container door.
The product range is CE marked and the factory holds ISO 9001, ISO 14001 and ISO 18001. The documents issued for a specific order are listed in the quotation.
Many forklift, pallet truck, stacker and reach truck models are held in ready stock; customised units are built in about 25 days. The confirmed date for your order is stated on the proforma invoice.
The machine ships with a parts manual. Wear parts can be ordered after delivery against serial number and part name.
Send load per move, lift height, floor surface, quantity and destination port. The reply lists the matching specification.
Prices are not published. Price follows chassis, mast or lift option, power arrangement, tyres and destination port; send the specification and you receive a line-by-line offer.
The minimum order quantity is one set, and mixed models can be combined in one container.
Standard terms are T/T 30% deposit with 70% balance against copy of the bill of lading.
Related
Same-family comparison using the published source figures; open a model page for the full specification.
Explore
Send the load per move, the lift height and the floor surface. The sales desk matches the chassis to those figures and replies with a line-by-line offer.